Difference between revisions of "Vnx-install"

From VNX
Jump to: navigation, search
(Manual Installation)
Line 32: Line 32:
 
<!--
 
<!--
 
* [[vnx-install-ubuntu3|Installation of VNX over Ubuntu (v13.10)]]
 
* [[vnx-install-ubuntu3|Installation of VNX over Ubuntu (v13.10)]]
-_>
+
-->
 
* [[vnx-install-ubuntu2|Installation of VNX over Ubuntu (v12.04, 12.10 and 13.04)]]
 
* [[vnx-install-ubuntu2|Installation of VNX over Ubuntu (v12.04, 12.10 and 13.04)]]
 
* [[vnx-install-ubuntu|Installation of VNX over Ubuntu (v11.04, 10.10, 10.04 and 9.10)]]
 
* [[vnx-install-ubuntu|Installation of VNX over Ubuntu (v11.04, 10.10, 10.04 and 9.10)]]

Revision as of 16:22, 31 January 2014

VNX Installation Guides

Requirements

  • Modern Linux distribution (Ubuntu 10.04 or newer recommended)
  • Processor with virtualization support (only needed if you use KVM virtual machines; not needed if you only use User-Mode-Linux or dynamips). You can check whether your processor has support for virtualization extensions using:
    • kvm-ok command if available in your system:
    • # kvm-ok
      INFO: Your CPU supports KVM extensions
      INFO: /dev/kvm exists
      KVM acceleration can be used
      
    • Manually, executing the following command:
    • egrep '(vmx|svm)' --color=always /proc/cpuinfo
      

      If you see the word vmx (for Intel processors) or svm (for AMD processors) in red, your processor has virtualization support.

      IMPORTANT: Be aware that virtualization extensions are controled from the BIOS. Even if you see the vmx/svm flag you will have to access your BIOS setup and check that virtualization support is enabled. If you get the following error message:

      FATAL: Error inserting kvm_intel (...): Operation not supported
      

      it probably means that virtualization support is disabled in your BIOS setup.

  • 2 Gb of Memory
  • 10 Gb of disk (depends mainly on the number of root-file-systems used)

Installing VNX from Packages

Not available yet.

Manual Installation