Page -> Mobile Node | Vistas : Página Discusión Ver fuente Historial |
De DIT-CDC
Revisión a fecha de 10:37 28 feb 2007; Gabi (Discusión | contribuciones)
################################## # MOBILE NODE # # File: /etc/network-mip6.conf # # # ################################## # MIPL Mobile IPv6 Configuration file # Should this node act as a home agent (ha), mobile node (mn) or # correspondent node (cn). HA and MN both have CN functionality # embedded. Default: cn. FUNCTIONALITY=mn # In error situations it may be desired to get more detailed # information what is happening. Increase this value to get more # messages from the module (default: 0). # You need option CONFIG_IPV6_MOBILITY_DEBUG=y in your kernel in order # to raise this value. DEBUGLEVEL=1 # Number of tunnel devices MIPL can use. Limits the number of # simultaneous bindings between different HAs and MNs. # If commented, there is no limit. #TUNNEL_NR=10 # Home address for mobile node with prefix length. Example: # 3FFE:2620:6:1234:ABCD::1/48 (Don't use the example value!) HOMEADDRESS=3ffe:3328:4:1::5/64 # Home agent's address for mobile node. HOMEAGENT=3ffe:3328:4:1::6/64 # Configuration file for security associations used for authentication # of MIPv6 signaling. If commented, there will be no authentication. #SAFILE=/etc/mipv6_sas.conf # Mobile nodes are allowed to send Router Solicitation messages at a # shorter minimum interval than normal IPv6 nodes (default: 4 # seconds). This value controls the mobile nodes minimum Router # Solicitation interval in seconds (default: 1). If you increase this # value, the handover time could increase, but you will decrease the # number of control packets in your network. RTR_SOLICITATION_INTERVAL=1 # After sending MAX_RTR_SOLICITATIONS (defined by IPv6, default: 3) # mobile node reduces Router Solicitation send rate with binary # exponential back-off mechanism until the maximum send time limit is # reached. This option sets the maximum send time in seconds. RTR_SOLICITATION_MAX_SENDTIME=5