Vnx-rootfslxc

How to create a LXC Ubuntu root filesystem for VNX

Basic installation

Follow this procedure to create a Ubuntu based LXC root filesystem for VNX. The procedure has been tested over Ubuntu 13.10.

• Create the rootfs with:

lxc-create -t ubuntu -n vnx_rootfs_lxc_ubuntu-13.10

Note1: The default username/password is ubuntu/ubuntu.
Note2: using the linux32 command it should be posible to create a 32 bits image from a 64 bits machine, that is:

linux32 lxc-create -t ubuntu -n vnx_rootfs_lxc_ubuntu

but it does not work...why?

• Move the rootfs to VNX filesystems directory:

mv /var/lib/lxc/vnx_rootfs_lxc_ubuntu-13.10/ /usr/share/vnx/filesystems/

• Edit the rootfs configuration file (/usr/share/vnx/filesystems/vnx_rootfs_lxc_ubuntu-13.10-v025/config) to reflect the directory change:

lxc.rootfs = /usr/share/vnx/filesystems/vnx_rootfs_lxc_ubuntu-13.10/rootfs
lxc.mount  = /usr/share/vnx/filesystems/vnx_rootfs_lxc_ubuntu-13.10/fstab

• Create fstab file (if not created):

touch vnx_rootfs_lxc_ubuntu-13.10/fstab

• Start the new rootfs to configure it and install new software:

lxc-start -n vnx_rootfs_lxc_ubuntu-13.10-v025 -F -f /usr/share/vnx/filesystems/vnx_rootfs_lxc_ubuntu-13.10/config

• Once the VM has started, make login (ubuntu/ubuntu) and:
• Add VNX user and change the passwords:

sudo adduser vnx
sudo adduser vnx sudo
sudo passwd root

• Update and install software:

sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install aptsh openssh-server traceroute telnet nmap apache2 wget tcpdump
update-rc.d -f apache2 remove   # to avoid automatic start

• Change VM name in hosts and hostname files:

sudo vi /etc/hosts         # change name to vnx
sudo vi /etc/hostname      #     "

• Important: edit /etc/network/interfaces and coment "inet dhcp" lines to avoid delays at startup. Besides, edit /etc/init/failsafe.conf and change all "sleep XX" commands to "sleep 1".
• Exit and login again with user vnx/xxxx to delete ubuntu user:

sudo deluser ubuntu

• Stop the VM with:

halt

• If you want to pack the root filesystem into a tar file, use the following command:

tar --numeric-owner -czpf vnx_rootfs_lxc_ubuntu-16.04-v025.tgz vnx_rootfs_lxc_ubuntu-16.04-v025

• Optionally, create a short link to the rootfs:

cd /usr/share/vnx/filesystems
ln -s vnx_rootfs_lxc_ubuntu-13.10 rootfs_lxc