Vnx-rootfsopenbsd

From VNX
Revision as of 16:41, 2 May 2016 by David (talk | contribs) (Created page with "{{Title|How to create a KVM OpenBSD root filesystem for VNX}} Follow this procedure to create a KVM OpenBSD based root filesystem for VNX. The procedure has been tested with ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

How to create a KVM OpenBSD root filesystem for VNX

Follow this procedure to create a KVM OpenBSD based root filesystem for VNX. The procedure has been tested with OpenBSD 5.8.

Basic installation

  • Create the filesystem disk image:
  • qemu-img create -f qcow2 vnx_rootfs_kvm_openbsd.qcow2 12G
    
  • Get OpenBSD installation CD. For example:
  • wget http://ftp.eu.openbsd.org/pub/OpenBSD/5.8/amd64/install58.iso
    cp install58.iso /almacen/iso
    
  • Create the virtual machine with:
  • vnx --create-rootfs vnx_rootfs_kvm_openbsd64.qcow2 --install-media /almacen/iso/openbsd-install58.iso --mem 512M --arch=x86_64
    
  • Follow OpenBSD installation menus to install a basic system with a user named "vnx". When asked about the network interface, answer "done". Notice that if you have downloaded installXX.iso, you can specify installation from CD in the setup program, instead of downloading packages from network. Later, you can update the system.
  • Configure the serial console by editting /etc/ttys file and changing the line:
  • tty00 "/usr/libexec/getty std.9600"   dialup  off secure
    

    to:

    tty00 "/usr/libexec/getty std.9600"   vt100  on secure
    
  • After ending installation, but before shutting down the virtual machine, you he to disable mpbios, as follows:
  • chroot /mnt
    config -ef /bsd
    disable mpbios
    quit
    
  • Finally, halt the system:
  • halt -p
    

The OS installer will offer to reboot, but do not do that. Instead, kill the VM window and then, in the host OS, interrupt with Ctrl-C the kvm program.