Vnx-install
VNX Installation Guides
Requirements
- Modern Linux distribution (Ubuntu 14.04 or newer recommended)
- Processor with virtualization support (only needed if you use KVM virtual machines; not needed if you only use User-Mode-Linux or dynamips). You can check whether your processor has support for virtualization extensions using:
- kvm-ok command if available in your system:
# kvm-ok INFO: Your CPU supports KVM extensions INFO: /dev/kvm exists KVM acceleration can be used
egrep '(vmx|svm)' --color=always /proc/cpuinfo
If you see the word vmx (for Intel processors) or svm (for AMD processors) in red, your processor has virtualization support.
IMPORTANT: Be aware that virtualization extensions are controled from the BIOS. Even if you see the vmx/svm flag you will have to access your BIOS setup and check that virtualization support is enabled. If you get the following error message:
FATAL: Error inserting kvm_intel (...): Operation not supported
it probably means that virtualization support is disabled in your BIOS setup.
Installing VNX from Packages
Not available yet.
Manual Installation
- Installation of VNX over Ubuntu (13.*, 14.*, 15.*, 16.*, 17.* and 18.*)
- Installation of VNX over Ubuntu (12.04, 12.10 and 13.04)
- Installation of VNX over Ubuntu (11.04, 10.10, 10.04 and 9.10)
- Installation of VNX over Fedora (23)
- Installation of VNX over Fedora (11 and 14)
- Installation of VNX over CentOS (6.2 and 5.6)
- Downloading VNX root filesystems