Vnx-install

From VNX
Revision as of 21:52, 13 July 2011 by David (talk | contribs) (→‎Installation over Fedora 11 (Draft))
Jump to: navigation, search

VNX Installation Guides

Requirements

  • Modern Linux distribution (Ubuntu 11.04/10.10/10.04 recommended)
  • Processor with virtualization support
  • 2 Gb of Memory
  • 10 Gb of disk (depends mainly on the numbre of root-file-systems used)

Installing VNX from Packages

Not available yet.

Manual Installation

Installation over CentOS 5.6 (Draft)

Recipe tested over a Dell Optiplex 745 installing Cent0S 5.6 64 bits from DVD.

Follow this steps to install VNX over CentOS 5.6:

  • Install the system from the CentOS 5.6 DVD with the options you want. Restart the system and update all packages with:
    • yum update
  • Once installation is finished, configure the RPMForge repository following the procedure described here:
    • wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.i386.rpm
rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
rpm -K rpmforge-release-0.5.2-2.el5.rf.*.rpm
rpm -i rpmforge-release-0.5.2-2.el5.rf.*.rpm
yum update
  • Install packages:
    • yum -y groupinstall "Development Tools"
yum -y install qemu kvm kmod-kvm libvirt virt-manager virt-viewer
yum -y install perl-XML-LibXML perl-XML-Parser perl-Net-Telnet tunctl screen
yum -y install wget libxml2-devel gnutls-devel  perl-Net-Pcap perl-Net-IPv6Addr 
yum -y install perl-Error perl-XML-DOM perl-NetAddr-IP perl-Readonly 
yum -y install perl-TermReadKey perl-Exception-Class graphviz perl-AppConfig
yum -y install perl-Sys-Virt

    --- Fallan 
roxterm
yum install device-mapper-devel uml_utilities
perl-ExtUtils-MakeMaker
  • Install uml_utilities manually (not rpm package found for CentOS 5):
    • mkdir src
cd src
wget http://user-mode-linux.sourceforge.net/uml_utilities_20070815.tar.bz2 
tar xfvj uml_utilities_20070815.tar.bz2 
cd tools-20070815/
yum -y install readline-devel ncurses-devel fuse-devel
make
make install
cd ..
  • Install libvirt 0.8.8:
    • /etc/init.d/libvirtd stop
wget http://libvirt.org/sources/libvirt-0.8.8.tar.gz
tar xfvz libvirt-0.8.8.tar.gz
cd libvirt-0.8.8
./configure --without-xen --prefix=/usr && make && make install
rm -f /usr/lib/libvirt.so.0
ln -s /usr/lib/libvirt.so.0.8.8 /usr/lib/libvirt.so.0
rm -f /usr/lib/libvirt-qemu.so.0
ln -s /usr/lib/libvirt-qemu.so.0.8.8 /usr/lib/libvirt-qemu.so.0 
rm -f /usr/lib64/libvirt*
ln -s /usr/lib/libvirt* /usr/lib64/
/etc/init.d/libvirtd start
  • Add symbolic link for kvm:
    • ln -s /usr/bin/qemu /usr/bin/kvm
  • Install VNX:
    • mkdir /tmp/vnx-update
cd /tmp/vnx-update
wget -N http://idefix.dit.upm.es/download/vnx/vnx-latest.tgz
tar xfvz vnx-latest.tgz
cd vnx-*
./install_vnx
  • Create the VNX config file (/etc/vnx.conf). You just can move the sample config file:
    • mv /etc/vnx.conf.sample /etc/vnx.conf
  • Disable SELINUX. If not disabled, virtual machines fail to start with:
    • Connecting to qemu:///system hypervisor...OK
libvirt error code: 1, message: internal error Process exited while reading console log output: char device redirected to /dev/pts/4
bind(unix:/root/.vnx/scenarios/simple_ubuntu/vms/ubuntu/ubuntu_socket): Permission denied
chardev: opening backend "socket" failed
  • Check that the hostname is correctly configured (in /etc/hosts it has to appear in the 127.0.0.1 and ::1 lines). If not configured you could get the following error when accesing virtual machine consoles:
    • virsh  console ubuntu
error:Falló al obtener nombre del host local
  • Disable host firewall or, alternatively, allow the services you want to use among virtual machines.
  • Download root file systems from http://idefix.dit.upm.es/download/vnx/filesystems and copy them to /usr/share/vnx/filesystems directory:
    • cd /usr/share/vnx/filesystems

# ubuntu server
wget -N http://idefix.dit.upm.es/download/vnx/filesystems/root_fs_ubuntu-10.10-v02.qcow2.bz2
bunzip2 root_fs_ubuntu-10.10-v02.qcow2.bz2
ln -s root_fs_ubuntu-10.10-v02.qcow2 root_fs_ubuntu

# ubuntu with gui
wget -N http://idefix.dit.upm.es/download/vnx/filesystems/root_fs_ubuntu-10.10-gui-v01.qcow2.bz2
bunzip2 root_fs_ubuntu-10.10-gui-v01.qcow2.bz2
ln -s root_fs_ubuntu-10.10-gui-v01.qcow2 root_fs_ubuntu-gui

# freebsd server
wget -N http://idefix.dit.upm.es/download/vnx/filesystems/root_fs_freebsd-8.1-v01.qcow2.bz2
bunzip2 root_fs_freebsd-8.1-v01.qcow2.bz2
ln -s root_fs_freebsd-8.1-v01.qcow2 root_fs_freebsd

# freebsd gui
wget -N http://idefix.dit.upm.es/download/vnx/filesystems/root_fs_freebsd-8.1-gui-v01.qcow2.bz2
bunzip2 root_fs_freebsd-8.1-gui-v01.qcow2.bz2
ln -s root_fs_freebsd-8.1-gui-v01.qcow2 root_fs_freebsd-gui

# winxp and win7
# Sorry! Unfortunately for legal reasons we cannot distribute windows XP
# or Windows 7 root filesystems. See VNX documentation for detailed recipes
# to create these root fylesystems from scratch

Additional install steps for Dynamips support

  • Install Dynamips and Dynagen:
yum -y install libpcap
wget http://downloads.sourceforge.net/project/dyna-gen/dynamips%20Linux%20RPM/0.2.8-RC2/dynamips-0.2.8RC2-1.i386.rpm
rpm --nodeps -i dynamips-0.2.8RC2-1.i386.rpm
wget http://downloads.sourceforge.net/project/dyna-gen/dynagen%20source%20_%20Linux/dynagen%200.11.0/dynagen-0.11.0-1.fc9.noarch.rpm
rpm -i dynagen-0.11.0-1.fc9.noarch.rpm
  • Add dynamips to system start-up and start it manually for this time:
chkconfig --add dynamips
/etc/init.d/dynamips start
  • Download and install cisco IOS image:
 cd /usr/share/vnx/filesystems
 # Cisco image
 wget ... c3640-js-mz.124-19.image
 ln -s c3640-js-mz.124-19.image c3640

dynagen /usr/share/vnx/examples/R.net
console R     # type 'no' to exit the config wizard and wait 
              # for the router to completely start 
idle-pc get R

Once you know the idle-pc value for your system, include it in /etc/vnx.conf file.

Additional install steps for Olive support

One additional step is needed to support Olive (Juniper) routers in VNX scenarios:






Retrieved from "http://web.dit.upm.es/vnxwiki/index.php?title=Vnx-install&oldid=220"