Difference between revisions of "Vnx-install-ubuntu3"

From VNX
Jump to: navigation, search
Line 1: Line 1:
 
{{Title|VNX Installation over Ubuntu}}
 
{{Title|VNX Installation over Ubuntu}}
  
This section describes the procedure for manually installing VNX over Ubuntu 13.10, 14.04, 14.10 or 15.04.
+
This section describes the procedure for manually installing VNX over Ubuntu 13.10, 14.04, 14.10, 15.04, 15.10 and 16.04.
  
 
Open a root shell window and follow these steps:
 
Open a root shell window and follow these steps:
Line 47: Line 47:
 
<li>Create the VNX config file (/etc/vnx.conf). You just can move the sample config file:</li>
 
<li>Create the VNX config file (/etc/vnx.conf). You just can move the sample config file:</li>
 
  sudo mv /usr/share/vnx/etc/vnx.conf.sample /etc/vnx.conf
 
  sudo mv /usr/share/vnx/etc/vnx.conf.sample /etc/vnx.conf
 +
 +
<li>Only for Ubuntu 15.04 or newer: change parameter 'overlayfs_workdir_option' in vnx.conf to 'yes'
 +
[lxc]
 +
...
 +
overlayfs_workdir_option = 'yes'
 +
...
  
 
<li>Download root file systems from http://idefix.dit.upm.es/download/vnx/filesystems and install them following these [[Vnx-install-root_fs|instructions]]</li>
 
<li>Download root file systems from http://idefix.dit.upm.es/download/vnx/filesystems and install them following these [[Vnx-install-root_fs|instructions]]</li>

Revision as of 22:32, 2 May 2016

VNX Installation over Ubuntu

This section describes the procedure for manually installing VNX over Ubuntu 13.10, 14.04, 14.10, 15.04, 15.10 and 16.04.

Open a root shell window and follow these steps:

  • Install all packages required (basic development, virtualization, perl libraries and auxiliar packages):
  • sudo apt-get update
    sudo apt-get install qemu-kvm libvirt-bin vlan xterm bridge-utils screen virt-manager \
      virt-viewer uml-utilities graphviz genisoimage gnome-terminal tree \
      curl w3m picocom expect lxc wmctrl xdotool pv bash-completion \
      libnetaddr-ip-perl libxml-libxml-perl libxml-tidy-perl libappconfig-perl \
      libreadonly-perl libterm-readline-perl-perl libnet-pcap-perl libnet-ipv6addr-perl \
      libsys-virt-perl libnet-telnet-perl liberror-perl libexception-class-perl \
      libxml-dom-perl libdbi-perl libmath-round-perl libio-pty-perl libnet-ip-perl \
      libxml-checker-perl libxml-parser-perl libfile-homedir-perl libswitch-perl openvswitch-switch
    
  • Tune libvirt configuration to work with VNX. In particular, edit /etc/libvirt/qemu.conf file and set the following parameters:
  • security_driver = "none"
    user = "root"
    group = "root"
    cgroup_device_acl = [
       "/dev/null", "/dev/full", "/dev/zero",
       "/dev/random", "/dev/urandom",
       "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
       "/dev/rtc", "/dev/hpet", "/dev/vfio/vfio", "/dev/net/tun"
    ]
    

    (you have to add "/dev/net/tun") and restart libvirtd for the changes to take effect:

    sudo restart libvirt-bin                # for ubuntu 14.10 or older
    sudo systemctl restart libvirt-bin      # for ubuntu 15.04 or later
    
  • Check that libvirt is running correctly, for example, executing:
  • sudo virsh list
    sudo virsh capabilities
    

    Note: Have a look at this document in case you get an error similar to this one:

    virsh: /usr/lib/libvirt.so.0: version LIBVIRT_PRIVATE-XXX not found (required by virsh)
    
  • Install VNX:
  • mkdir /tmp/vnx-update
    cd /tmp/vnx-update
    rm -rf /tmp/vnx-update/vnx-*
    wget http://vnx.dit.upm.es/vnx/vnx-latest.tgz
    tar xfvz vnx-latest.tgz
    cd vnx-*
    sudo ./install_vnx
    
  • Create the VNX config file (/etc/vnx.conf). You just can move the sample config file:
  • sudo mv /usr/share/vnx/etc/vnx.conf.sample /etc/vnx.conf
    
  • Only for Ubuntu 15.04 or newer: change parameter 'overlayfs_workdir_option' in vnx.conf to 'yes' [lxc] ... overlayfs_workdir_option = 'yes' ...
  • Download root file systems from http://idefix.dit.upm.es/download/vnx/filesystems and install them following these instructions
  • Optionally, enable bash-completion in your system to allow using VNX bash completion capabilities. For example, to enable it for all users in your system, just edit '/etc/bash.bashrc' and uncomment the following lines:
  • # enable bash completion in interactive shells
    if ! shopt -oq posix; then
      if [ -f /usr/share/bash-completion/bash_completion ]; then
        . /usr/share/bash-completion/bash_completion
      elif [ -f /etc/bash_completion ]; then
        . /etc/bash_completion
      fi
    fi
    

Additional install steps for Dynamips support

  • Install Dynamips and Dynagen:
apt-get install dynamips dynagen
#!/bin/sh
# Start/stop the dynamips program as a daemon.
#
### BEGIN INIT INFO
# Provides:          dynamips
# Required-Start:
# Required-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Cisco hardware emulator daemon
### END INIT INFO

DAEMON=/usr/bin/dynamips
NAME=dynamips
PORT=7200
PIDFILE=/var/run/$NAME.pid 
LOGFILE=/var/log/$NAME.log
DESC="Cisco Emulator"
SCRIPTNAME=/etc/init.d/$NAME

test -f $DAEMON || exit 0

. /lib/lsb/init-functions


case "$1" in
start)  log_daemon_msg "Starting $DESC " "$NAME"
        start-stop-daemon --start --chdir /tmp --background --make-pidfile --pidfile $PIDFILE --name $NAME --startas $DAEMON -- -H $PORT -l $LOGFILE
        log_end_msg $?
        ;;
stop)   log_daemon_msg "Stopping $DESC " "$NAME"
        start-stop-daemon --stop --quiet --pidfile $PIDFILE --name $NAME
        log_end_msg $?
        ;;
restart) log_daemon_msg "Restarting $DESC " "$NAME"
        start-stop-daemon --stop --retry 5 --quiet --pidfile $PIDFILE --name $NAME
        start-stop-daemon --start --chdir /tmp --background --make-pidfile --pidfile $PIDFILE --name $NAME --startas $DAEMON -- -H $PORT -l $LOGFILE
        log_end_msg $?
        ;;
status)
        status_of_proc -p $PIDFILE $DAEMON $NAME && exit 0 || exit $? 
        #status $NAME
        #RETVAL=$?
        ;; 
*)      log_action_msg "Usage: $SCRIPTNAME {start|stop|restart|status}"
        exit 2
        ;;
esac
exit 0

  • Set execution permissions for the script and add it to system start-up:
chmod +x /etc/init.d/dynamips
update-rc.d dynamips defaults
/etc/init.d/dynamips start
  • Download and install cisco IOS image:
 cd /usr/share/vnx/filesystems
 # Cisco image
 wget ... c3640-js-mz.124-19.image
 ln -s c3640-js-mz.124-19.image c3640
dynagen /usr/share/vnx/examples/R3640.net
console R3640     # type 'no' to exit the config wizard and wait 
              # for the router to completely start 
idlepc get R3640

Once you know the idlepc value for your system, include it in /etc/vnx.conf file.