|
|
| (32 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| − | {{Title|OSPF Networking Laboratory}}
| + | #REDIRECT [[Example-OSPF 1.8]] |
| − | | |
| − | <big>
| |
| − | Authors:
| |
| − | '''Fermín Galán (galan at dit.upm.es)'''
| |
| − | '''David Fernández (david at dit.upm.es)'''
| |
| − | '''version 1.7, November 23rd, 2006'''
| |
| − | </big>
| |
| − | | |
| − | __TOC__
| |
| − | | |
| − | | |
| − | == Scenario ==
| |
| − | | |
| − | This example shows the VNUML implementation of a networking laboratory for OSPF dymanic routing protocol tests. It is a virtual implementation of the real-based network laboratory testbed of the [http://www.lab.dit.upm.es/~labrst/ Telematic Networks and Services Laboratory] (in Spanish) last exercise at [http://www.dit.upm.es/ DIT]-[http://www.upm.es UPM] grade course. This environment was used at [http://ithet2004.boun.edu.tr/ ITHET'04] in order to illustrate VNUML application for high educational purposes.The laboratory tries to resemble to the network of a distributed organization. The core of the network is a backbone (routers RB1, RB2, RB3 and RB4) that interconnects several regional headquarters (from A to F) to the central organization headquarters. Each regional headquarters provides connectivity for two sites (from 1 to 12).
| |
| − | | |
| − | <center>
| |
| − | </center>
| |
| − | | |
| − | [[Image:ospf_lab-small.png|center|frame|100px| [[Image:ospf_lab.png|OSPF Lab]] ]] | |
| − | | |
| − | kk
| |
| − | | |
| − | [[Image:ospf_lab.jpg|center|frame|100px|OSPF Lab]]
| |
| − | | |
| − | | |
| − | The network layout is shown in the picture. Click to enlarge.
| |
| − | * Each site is composed of a computer (PCx) and an outbound router. The computer is configured with a default route to the outbound router.
| |
| − | * Each regional headquarters is composed of a server (SRx), an inbound router (RRx2) and an outbound router (RRx1). The server is configured with a default route to the outbound router.
| |
| − | * The central headquarters of several internals routers (RC1, RC2, RC3 and RC4) and a server (SC). All them are configured with default routes to the backbone. All the routers in the simulation (except for the ones in the central headquarters) run ospfd, a daemon process from the [http://www.zebra.org Zebra Suite] that implements [http://www.ietf.org/rfc/rfc2328.txt OSPF protocol]. This protocol allows each router to configure dynamic routes so, after a convergence time, global connectivity is achive once the simulation has been started. You'll need to download the [ospf_lab_conf.tar.gz configuration for ospfd daemons] and unpacked it in the examples directory:
| |
| − | cd /usr/share/vnuml/examples
| |
| − | tar xfvz ospf_lab_conf.tar.gz
| |
| − | | |
| − | Note that this is a '''very big''' VNUML simulation, involving 51 virtual machines and 45 virtual networks. So, be aware that the hosting machine could get stressed (or even worse!). You can use the -w switch to increase the boot timeout (see [http://www.dit.upm.es/vnuml/doc/current/user/index.html#build_topology User Manual] for details). For example:
| |
| − | | |
| − | vnumlparser.pl -t ospf_lab.xml -v -w 120
| |
| − | | |
| − | (However, if your simulation is too big for your host, try to use a tiner version of the VNUML specification. For example, try to remove some of the regional headquarters and/or sites. There is a [ospf_lab_tiny.xml tiny version of ospf_lab.xml] with regional headquarters C, D and E; sites 2, 3 and 11; and servers SRA, RFB and SRF commented out in the XML)
| |
| − | | |
| − | Some examples of test performed with this virtual scenario:
| |
| − | | |
| − | * Connectivity from PC01 to PC12:
| |
| − | | |
| − | PC01:~# traceroute -n 195.1.95.66
| |
| − | traceroute to 195.1.95.66 (195.1.95.66), 30 hops max, 38 byte packets
| |
| − | 1 195.1.85.1 0.647 ms 0.614 ms 0.526 ms
| |
| − | 2 195.1.95.193 0.976 ms 140.597 ms 0.814 ms
| |
| − | 3 195.1.84.1 15.086 ms 1.097 ms 1.182 ms
| |
| − | 4 195.1.95.161 1.404 ms 1.299 ms 1.322 ms
| |
| − | 5 195.1.95.129 5.458 ms 2.132 ms 2.156 ms
| |
| − | 6 195.1.95.138 11.272 ms 2.355 ms 2.301 ms
| |
| − | 7 195.1.95.182 2.874 ms 2.798 ms 68.750 ms
| |
| − | 8 195.1.94.2 3.377 ms 2.919 ms 3.116 ms
| |
| − | 9 195.1.95.238 3.328 ms 3.189 ms 4.028 ms
| |
| − | 10 195.1.95.66 4.896 ms 3.875 ms 4.395 ms
| |
| − | | |
| − | * Connectivity from PC01 to PC04:
| |
| − | | |
| − | PC01:~# traceroute -n 195.1.87.66
| |
| − | traceroute to 195.1.87.66 (195.1.87.66), 30 hops max, 38 byte packets
| |
| − | 1 195.1.85.1 1.127 ms 0.461 ms 0.494 ms
| |
| − | 2 195.1.95.193 0.906 ms 0.701 ms 0.983 ms
| |
| − | 3 195.1.84.1 1.230 ms 1.569 ms 1.249 ms
| |
| − | 4 195.1.95.161 1.347 ms 1.309 ms 1.287 ms
| |
| − | 5 195.1.95.166 2.131 ms 1.970 ms 1.753 ms
| |
| − | 6 195.1.86.2 2.286 ms 2.622 ms 2.124 ms
| |
| − | 7 195.1.95.206 2.449 ms 2.200 ms 2.647 ms
| |
| − | 8 195.1.87.66 3.022 ms 2.741 ms 3.103 ms
| |
| − | | |
| − | * Connectivity from PC01 to SC:
| |
| − | | |
| − | PC01:~# traceroute -n 10.0.11.22
| |
| − | traceroute to 10.0.11.22 (10.0.11.22), 30 hops max, 38 byte packets
| |
| − | 1 195.1.85.1 0.599 ms 0.613 ms 0.503 ms
| |
| − | 2 195.1.95.193 0.842 ms 0.790 ms 0.978 ms
| |
| − | 3 195.1.84.1 1.291 ms 1.443 ms 1.084 ms
| |
| − | 4 195.1.95.161 1.447 ms 1.318 ms 29.843 ms
| |
| − | 5 195.1.95.129 2.391 ms 2.183 ms 1.761 ms
| |
| − | 6 10.0.11.22 2.067 ms 2.153 ms 2.124 ms
| |
| − | | |
| − | * OSPF information from ospfd at RB1:
| |
| − | | |
| − | RB1> show ip ospf route
| |
| − | ============ OSPF network routing table ============
| |
| − | N 10.0.11.0/24 [10] area: (0.0.0.0)
| |
| − | directly attached to eth3
| |
| − | N 195.1.84.0/26 [30] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.85.0/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.85.64/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.86.0/26 [30] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.87.0/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.87.64/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.88.0/26 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.89.0/26 [60] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.89.64/26 [60] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.90.0/26 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.91.0/26 [60] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.91.64/26 [60] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.92.0/26 [30] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.93.0/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.93.64/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.94.0/26 [30] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.0/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.64/26 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.128/30 [10] area: (0.0.0.0)
| |
| − | directly attached to eth1
| |
| − | N 195.1.95.132/30 [20] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.95.136/30 [20] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.140/30 [10] area: (0.0.0.0)
| |
| − | directly attached to eth2
| |
| − | N 195.1.95.160/30 [20] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.95.164/30 [20] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.95.168/30 [30] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.172/30 [30] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.176/30 [20] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.180/30 [20] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.192/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.95.196/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.95.200/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.95.204/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | N 195.1.95.208/30 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.212/30 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.216/30 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.220/30 [50] area: (0.0.0.0)
| |
| − | via 195.1.95.130, eth1
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.224/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.228/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.232/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − | N 195.1.95.236/30 [40] area: (0.0.0.0)
| |
| − | via 195.1.95.142, eth2
| |
| − |
| |
| − | ============ OSPF external routing table ===========
| |
| − |
| |
| − | RB1> show ip ospf neighbor
| |
| − |
| |
| − | Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL
| |
| − | 195.1.95.165 1 Full/DR 00:00:37 195.1.95.130 eth1:195.1.95.129 0 0 0
| |
| − | 195.1.95.181 1 Full/DR 00:00:33 195.1.95.142 eth2:195.1.95.141 0 0 0
| |
| − |
| |
| − | RB1> show ip ospf interface
| |
| − | ...
| |
| − | eth1 is up, line protocol is up
| |
| − |
| |
| − | Internet Address 195.1.95.129/30, Area (0.0.0.0)
| |
| − | Router ID 195.1.95.141, Network Type BROADCAST, Cost: 10
| |
| − | Transmit Delay is 1 sec, State Backup, Priority 1
| |
| − | Designated Router (ID) 195.1.95.165, Interface Address 195.1.95.130
| |
| − | Backup Designated Router (ID) 195.1.95.141, Interface Address 195.1.95.129
| |
| − | Timer intarvals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
| |
| − | Hello due in 00:00:09
| |
| − | Neighbor Count is 1, Adjacent neighbor count is 1
| |
| − | eth2 is up, line protocol is up
| |
| − |
| |
| − | Internet Address 195.1.95.141/30, Area (0.0.0.0)
| |
| − | Router ID 195.1.95.141, Network Type BROADCAST, Cost: 10
| |
| − | Transmit Delay is 1 sec, State Backup, Priority 1
| |
| − | Designated Router (ID) 195.1.95.181, Interface Address 195.1.95.142
| |
| − | Backup Designated Router (ID) 195.1.95.141, Interface Address 195.1.95.141
| |
| − | Timer intarvals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
| |
| − | Hello due in 00:00:09
| |
| − | Neighbor Count is 1, Adjacent neighbor count is 1
| |
| − | eth3 is up, line protocol is up
| |
| − |
| |
| − | Internet Address 10.0.11.50/24, Area (0.0.0.0)
| |
| − | Router ID 195.1.95.141, Network Type BROADCAST, Cost: 10
| |
| − | Transmit Delay is 1 sec, State DR, Priority 1
| |
| − | Designated Router (ID) 195.1.95.141, Interface Address 10.0.11.50
| |
| − | No backup designated router on this network
| |
| − | Timer intarvals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
| |
| − | Hello due in 00:00:06
| |
| − | Neighbor Count is 0, Adjacent neighbor count is 0
| |
| − | ...
| |
| − | | |
| − | You can download the simulation file from [ospf_lab.xml here].
| |
| − | | |
| − | The example could be improved in several ways. For example:
| |
| − | | |
| − | * The simulation is too big and this has a significative impact when building topology. A solution could be to split the simulation in several pieces, and building only desired parts for each testing case. Read more about this in the [../../user/index.html#concurrent_simulations VNUML User Manual].
| |
| − | | |
| − | * The provided configuration for ospfd daemons is quite simple: all the routers uses OSPF in all their directly connected networks and a single area is use. A multiarea configuration could be more desirable. In addition, some networks (specially PPP-like links between some routers) shouldn't be globally advertised.
| |
| − | | |
| − | == VNUML Description ==
| |
| − | | |
| − | </pre>
| |
| − | <?xml version="1.0" encoding="UTF-8"?>
| |
| − | <!DOCTYPE vnuml SYSTEM "/usr/share/xml/vnuml/vnuml.dtd">
| |
| − | <!-- usual mask values:
| |
| − |
| |
| − | /24 -> 255.255.255.0
| |
| − | /26 -> 255.255.255.192
| |
| − | /28 -> 255.255.255.240
| |
| − | /30 -> 255.255.255.252
| |
| − |
| |
| − | -->
| |
| − |
| |
| − | <vnuml>
| |
| − | <global>
| |
| − | <version>1.7</version>
| |
| − | <simulation_name>ospf_lab</simulation_name>
| |
| − | <ssh_version>1</ssh_version>
| |
| − | <ssh_key>~/.ssh/identity.pub</ssh_key>
| |
| − | <automac offset="0"/>
| |
| − | <vm_mgmt type="net" network="10.250.0.0" mask="24" offset="0">
| |
| − | <mgmt_net sock="/var/run/vnuml/Mgmt_net.ctl" hostip="10.250.0.1"/>
| |
| − | </vm_mgmt>
| |
| − | <vm_defaults>
| |
| − | <filesystem type="cow">/usr/share/vnuml/filesystems/root_fs_tutorial</filesystem>
| |
| − | <kernel>/usr/share/vnuml/kernels/linux</kernel>
| |
| − | <console id="0">pts</console>
| |
| − | </vm_defaults>
| |
| − | </global>
| |
| − |
| |
| − | <net name="Core1" mode="uml_switch" /> <!-- 195.1.95.128/30 -->
| |
| − | <net name="Core2" mode="uml_switch" /> <!-- 195.1.95.132/30 -->
| |
| − | <net name="Core3" mode="uml_switch" /> <!-- 195.1.95.136/30 -->
| |
| − | <net name="Core4" mode="uml_switch" /> <!-- 195.1.95.140/30 -->
| |
| − |
| |
| − | <net name="boneA" mode="uml_switch" /> <!-- 195.1.95.160/30 -->
| |
| − | <net name="boneB" mode="uml_switch" /> <!-- 195.1.95.164/30 -->
| |
| − | <net name="boneC" mode="uml_switch" /> <!-- 195.1.95.168/30 -->
| |
| − | <net name="boneD" mode="uml_switch" /> <!-- 195.1.95.172/30 -->
| |
| − | <net name="boneE" mode="uml_switch" /> <!-- 195.1.95.176/30 -->
| |
| − | <net name="boneF" mode="uml_switch" /> <!-- 195.1.95.180/30 -->
| |
| − |
| |
| − | <net name="sedeA" mode="uml_switch" /> <!-- 195.1.84.0/26 -->
| |
| − | <net name="linkA01" mode="uml_switch" /> <!-- 195.1.95.192/30 -->
| |
| − | <net name="linkA02" mode="uml_switch" /> <!-- 195.1.95.196/30 -->
| |
| − | <net name="suc01" mode="uml_switch" /> <!-- 195.1.85.0/26 -->
| |
| − | <net name="suc02" mode="uml_switch" /> <!-- 195.1.85.64/26 -->
| |
| − |
| |
| − | <net name="sedeB" mode="uml_switch" /> <!-- 195.1.86.0/26 -->
| |
| − | <net name="linkB03" mode="uml_switch" /> <!-- 195.1.95.200/30 -->
| |
| − | <net name="linkB04" mode="uml_switch" /> <!-- 195.1.95.204/30 -->
| |
| − | <net name="suc03" mode="uml_switch" /> <!-- 195.1.87.0/26-->
| |
| − | <net name="suc04" mode="uml_switch" /> <!-- 195.1.87.64/26 -->
| |
| − |
| |
| − | <net name="sedeC" mode="uml_switch" /> <!-- 195.1.88.0/26 -->
| |
| − | <net name="linkC05" mode="uml_switch" /> <!-- 195.1.95.208/30 -->
| |
| − | <net name="linkC06" mode="uml_switch" /> <!-- 195.1.95.212/30 -->
| |
| − | <net name="suc05" mode="uml_switch" /> <!-- 195.1.89.0/26 -->
| |
| − | <net name="suc06" mode="uml_switch" /> <!-- 195.1.89.64/26 -->
| |
| − |
| |
| − | <net name="sedeD" mode="uml_switch" /> <!-- 195.1.90.0/26 -->
| |
| − | <net name="linkD07" mode="uml_switch" /> <!-- 195.1.95.216/30 -->
| |
| − | <net name="linkD08" mode="uml_switch" /> <!-- 195.1.95.220/30 -->
| |
| − | <net name="suc07" mode="uml_switch" /> <!-- 195.1.91.0/26 -->
| |
| − | <net name="suc08" mode="uml_switch" /> <!-- 195.1.91.64/26 -->
| |
| − |
| |
| − | <net name="sedeE" mode="uml_switch" /> <!-- 195.1.92.0/26 -->
| |
| − | <net name="linkE09" mode="uml_switch" /> <!-- 195.1.95.224/30 -->
| |
| − | <net name="linkE10" mode="uml_switch" /> <!-- 195.1.95.228/30 -->
| |
| − | <net name="suc09" mode="uml_switch" /> <!-- 195.1.93.0/26 -->
| |
| − | <net name="suc10" mode="uml_switch" /> <!-- 195.1.93.64/26 -->
| |
| − |
| |
| − | <net name="sedeF" mode="uml_switch" /> <!-- 195.1.94.0/26 -->
| |
| − | <net name="linkF11" mode="uml_switch" /> <!-- 195.1.95.232/30 -->
| |
| − | <net name="linkF12" mode="uml_switch" /> <!-- 195.1.95.236/30 -->
| |
| − | <net name="suc11" mode="uml_switch" /> <!-- 195.1.95.0/26 -->
| |
| − | <net name="suc12" mode="uml_switch" /> <!-- 195.1.95.64/26 -->
| |
| − |
| |
| − | <net name="centraC" mode="uml_switch" /> <!-- 10.0.11.0/24 -->
| |
| − | <net name="centra1" mode="uml_switch" /> <!-- 10.0.12.0/28 -->
| |
| − | <net name="centra2" mode="uml_switch" /> <!-- 10.0.12.16/28 -->
| |
| − | <net name="centra3" mode="uml_switch" /> <!-- 10.0.32.0/28 -->
| |
| − | <net name="centra4" mode="uml_switch" /> <!-- 10.0.12.48/28 -->
| |
| − |
| |
| − | <!-- The Core -->
| |
| − | <vm name="RB1">
| |
| − | <if id="1" net="Core1">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.129</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="Core4">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.141</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="centraC">
| |
| − | <ipv4 mask="255.255.255.0">10.0.11.50</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB1</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RB2">
| |
| − | <if id="1" net="Core1">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.130</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="Core2">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.133</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="boneA">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.161</ipv4>
| |
| − | </if>
| |
| − | <if id="4" net="boneB">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.165</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB2</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RB3">
| |
| − | <if id="1" net="Core2">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.134</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="Core3">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.137</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="boneC">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.169</ipv4>
| |
| − | </if>
| |
| − | <if id="4" net="boneD">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.173</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB3</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RB4">
| |
| − | <if id="1" net="Core3">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.138</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="Core4">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.142</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="boneE">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.177</ipv4>
| |
| − | </if>
| |
| − | <if id="4" net="boneF">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.181</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RB4</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Regional headquarters A -->
| |
| − |
| |
| − | <vm name="RRA1">
| |
| − | <if id="1" net="boneA">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.162</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="sedeA">
| |
| − | <ipv4 mask="255.255.255.192">195.1.84.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRA1</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RRA2">
| |
| − | <if id="1" net="sedeA">
| |
| − | <ipv4 mask="255.255.255.192">195.1.84.2</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="linkA01">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.193</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="linkA02">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.197</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRA2</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="SRA">
| |
| − | <if id="1" net="sedeA">
| |
| − | <ipv4 mask="255.255.255.192">195.1.84.3</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.84.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 01 -->
| |
| − |
| |
| − | <vm name="rout01">
| |
| − | <if id="1" net="linkA01">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.194</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc01">
| |
| − | <ipv4 mask="255.255.255.192">195.1.85.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout01</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC01">
| |
| − | <if id="1" net="suc01">
| |
| − | <ipv4 mask="255.255.255.192">195.1.85.2</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.85.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 02 -->
| |
| − |
| |
| − | <vm name="rout02">
| |
| − | <if id="1" net="linkA02">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.198</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc02">
| |
| − | <ipv4 mask="255.255.255.192">195.1.85.65</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout02</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC02">
| |
| − | <if id="1" net="suc02">
| |
| − | <ipv4 mask="255.255.255.192">195.1.85.66</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.85.65">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Regional headquarters B -->
| |
| − |
| |
| − | <vm name="RRB1">
| |
| − | <if id="1" net="boneB">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.166</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="sedeB">
| |
| − | <ipv4 mask="255.255.255.192">195.1.86.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRB1</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RRB2">
| |
| − | <if id="1" net="sedeB">
| |
| − | <ipv4 mask="255.255.255.192">195.1.86.2</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="linkB03">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.201</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="linkB04">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.205</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRB2</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="SRB">
| |
| − | <if id="1" net="sedeB">
| |
| − | <ipv4 mask="255.255.255.192">195.1.86.3</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.86.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 03 -->
| |
| − |
| |
| − | <vm name="rout03">
| |
| − | <if id="1" net="linkB03">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.202</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc03">
| |
| − | <ipv4 mask="255.255.255.192">195.1.87.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout03</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC03">
| |
| − | <if id="1" net="suc03">
| |
| − | <ipv4 mask="255.255.255.192">195.1.87.2</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.87.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 04 -->
| |
| − |
| |
| − | <vm name="rout04">
| |
| − | <if id="1" net="linkB04">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.206</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc04">
| |
| − | <ipv4 mask="255.255.255.192">195.1.87.65</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout04</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC04">
| |
| − | <if id="1" net="suc04">
| |
| − | <ipv4 mask="255.255.255.192">195.1.87.66</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.87.65">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Regional headquarters C -->
| |
| − |
| |
| − | <vm name="RRC1">
| |
| − | <if id="1" net="boneC">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.170</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="sedeC">
| |
| − | <ipv4 mask="255.255.255.192">195.1.88.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRC1</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RRC2">
| |
| − | <if id="1" net="sedeC">
| |
| − | <ipv4 mask="255.255.255.192">195.1.88.2</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="linkC05">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.209</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="linkC06">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.213</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRC2</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="SRC">
| |
| − | <if id="1" net="sedeC">
| |
| − | <ipv4 mask="255.255.255.192">195.1.88.3</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.88.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 05 -->
| |
| − |
| |
| − | <vm name="rout05">
| |
| − | <if id="1" net="linkC05">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.210</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc05">
| |
| − | <ipv4 mask="255.255.255.192">195.1.89.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout05</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC05">
| |
| − | <if id="1" net="suc05">
| |
| − | <ipv4 mask="255.255.255.192">195.1.89.2</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.89.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 06 -->
| |
| − |
| |
| − | <vm name="rout06">
| |
| − | <if id="1" net="linkC06">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.214</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc06">
| |
| − | <ipv4 mask="255.255.255.192">195.1.89.65</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout06</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC06">
| |
| − | <if id="1" net="suc06">
| |
| − | <ipv4 mask="255.255.255.192">195.1.89.66</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.89.65">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Regional headquarters D -->
| |
| − |
| |
| − | <vm name="RRD1">
| |
| − | <if id="1" net="boneD">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.174</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="sedeD">
| |
| − | <ipv4 mask="255.255.255.192">195.1.90.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRD1</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RRD2">
| |
| − | <if id="1" net="sedeD">
| |
| − | <ipv4 mask="255.255.255.192">195.1.90.2</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="linkD07">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.217</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="linkD08">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.221</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRD2</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="SRD">
| |
| − | <if id="1" net="sedeD">
| |
| − | <ipv4 mask="255.255.255.192">195.1.90.3</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.90.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 07 -->
| |
| − |
| |
| − | <vm name="rout07">
| |
| − | <if id="1" net="linkD07">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.218</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc07">
| |
| − | <ipv4 mask="255.255.255.192">195.1.91.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout07</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC07">
| |
| − | <if id="1" net="suc07">
| |
| − | <ipv4 mask="255.255.255.192">195.1.91.2</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.91.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 08 -->
| |
| − |
| |
| − | <vm name="rout08">
| |
| − | <if id="1" net="linkD08">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.222</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc08">
| |
| − | <ipv4 mask="255.255.255.192">195.1.91.65</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout08</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC08">
| |
| − | <if id="1" net="suc08">
| |
| − | <ipv4 mask="255.255.255.192">195.1.91.66</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.91.65">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Regional headquarters E -->
| |
| − |
| |
| − | <vm name="RRE1">
| |
| − | <if id="1" net="boneE">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.178</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="sedeE">
| |
| − | <ipv4 mask="255.255.255.192">195.1.92.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRE1</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RRE2">
| |
| − | <if id="1" net="sedeE">
| |
| − | <ipv4 mask="255.255.255.192">195.1.92.2</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="linkE09">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.225</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="linkE10">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.229</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRE2</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="SRE">
| |
| − | <if id="1" net="sedeE">
| |
| − | <ipv4 mask="255.255.255.192">195.1.92.3</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.92.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 09 -->
| |
| − |
| |
| − | <vm name="rout09">
| |
| − | <if id="1" net="linkE09">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.226</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc09">
| |
| − | <ipv4 mask="255.255.255.192">195.1.93.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout09</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC09">
| |
| − | <if id="1" net="suc09">
| |
| − | <ipv4 mask="255.255.255.192">195.1.93.2</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.93.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 10 -->
| |
| − |
| |
| − | <vm name="rout10">
| |
| − | <if id="1" net="linkE10">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.230</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc10">
| |
| − | <ipv4 mask="255.255.255.192">195.1.93.65</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout10</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC10">
| |
| − | <if id="1" net="suc10">
| |
| − | <ipv4 mask="255.255.255.192">195.1.93.66</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.93.65">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Regional headquarters F -->
| |
| − |
| |
| − | <vm name="RRF1">
| |
| − | <if id="1" net="boneF">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.182</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="sedeF">
| |
| − | <ipv4 mask="255.255.255.192">195.1.94.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRF1</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RRF2">
| |
| − | <if id="1" net="sedeF">
| |
| − | <ipv4 mask="255.255.255.192">195.1.94.2</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="linkF11">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.233</ipv4>
| |
| − | </if>
| |
| − | <if id="3" net="linkF12">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.237</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/RRF2</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="SRF">
| |
| − | <if id="1" net="sedeF">
| |
| − | <ipv4 mask="255.255.255.192">195.1.94.3</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.94.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 11 -->
| |
| − |
| |
| − | <vm name="rout11">
| |
| − | <if id="1" net="linkF11">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.234</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc11">
| |
| − | <ipv4 mask="255.255.255.192">195.1.95.1</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout11</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC11">
| |
| − | <if id="1" net="suc11">
| |
| − | <ipv4 mask="255.255.255.192">195.1.95.2</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.95.1">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Site 12 -->
| |
| − |
| |
| − | <vm name="rout12">
| |
| − | <if id="1" net="linkF12">
| |
| − | <ipv4 mask="255.255.255.252">195.1.95.238</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="suc12">
| |
| − | <ipv4 mask="255.255.255.192">195.1.95.65</ipv4>
| |
| − | </if>
| |
| − | <forwarding type="ip"/>
| |
| − | <filetree root="/etc/zebra" when="start">/usr/share/vnuml/examples/conf/ospf_lab/rout12</filetree>
| |
| − | <exec seq="start" type="verbatim">for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 0 amp;gt; $f; done</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/zebra -f /etc/zebra/zebra.conf -d</exec>
| |
| − | <exec seq="start" type="verbatim">/usr/local/sbin/ospfd -f /etc/zebra/ospfd.conf -d</exec>
| |
| − | <exec seq="stop" type="verbatim">killall zebra</exec>
| |
| − | <exec seq="stop" type="verbatim">killall ospfd</exec>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="PC12">
| |
| − | <if id="1" net="suc12">
| |
| − | <ipv4 mask="255.255.255.192">195.1.95.66</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="195.1.95.65">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <!-- Central headquarters -->
| |
| − |
| |
| − | <vm name="RC1">
| |
| − | <if id="1" net="centraC">
| |
| − | <ipv4 mask="255.255.255.0">10.0.11.1</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="centra1">
| |
| − | <ipv4 mask="255.255.255.240">10.0.12.1</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="10.0.11.50">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RC2">
| |
| − | <if id="1" net="centraC">
| |
| − | <ipv4 mask="255.255.255.0">10.0.11.2</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="centra2">
| |
| − | <ipv4 mask="255.255.255.240">10.0.12.17</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="10.0.11.50">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RC3">
| |
| − | <if id="1" net="centraC">
| |
| − | <ipv4 mask="255.255.255.0">10.0.11.3</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="centra3">
| |
| − | <ipv4 mask="255.255.255.240">10.0.32.1</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="10.0.11.50">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="RC4">
| |
| − | <if id="1" net="centraC">
| |
| − | <ipv4 mask="255.255.255.0">10.0.11.4</ipv4>
| |
| − | </if>
| |
| − | <if id="2" net="centra3">
| |
| − | <ipv4 mask="255.255.255.240">10.0.12.49</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="10.0.11.50">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | <vm name="SC">
| |
| − | <if id="1" net="centraC">
| |
| − | <ipv4 mask="255.255.255.0">10.0.11.22</ipv4>
| |
| − | </if>
| |
| − | <route type="ipv4" gw="10.0.11.50">default</route>
| |
| − | </vm>
| |
| − |
| |
| − | </vnuml>
| |
| − | </pre>
| |
| − | | |
| − | == Old Releases ==
| |
| − | | |
| − | * [http://jungla.dit.upm.es/~vnuml/doc/examples/ospf_lab/1.3/ospf_lab.html 1.3]
| |
| − | * [http://jungla.dit.upm.es/~vnuml/doc/examples/ospf_lab/1.6/ospf_lab.html 1.6]
| |
